youqing
Industrial & Engineering Coatings — packaging
Label artwork shown is our current design draft, pending final print approval.

GT-WTP

Thin-Film Weather-Resistant Intumescent Fireproof Coating for Exterior Steel

Request a Quote

MOQ: Trial order — contact us · Packing: 25 kg plastic pail

Outdoor weather-resistant thin-film intumescent fireproof coating to GB 14907-2018 at 3–7 mm build. The modified formulation resists UV, rain wash and freeze-thaw — a balanced-cost choice for exterior industrial steel with fire ratings up to 1.5 h. Not for ratings above 1.5 h, load-bearing columns rated 2–3 h, or long-term water immersion.

  • Lower cost per fire-rating hour than the ultra-thin exterior grade on large steel areas
  • water, humidity and freeze-thaw resistance — stable outdoors
  • high spray efficiency on large exposed structures
  • supplied as a matched system with primers and topcoats

Exposed steel beams of outdoor plants, yard steel racks, stockyard frames and semi-exterior industrial steel frames

SpecificationFire resistance rating 0.5 / 1.0 / 1.5 h
Coverage4.5–8.5 kg/m² (at design dry film thickness)
VOCWater-based, low-VOC
Shelf life6 months (sealed, 0–38°C, dry and ventilated)
Lead time15–20 days production lead time, excluding freight
Recommended dry film thickness3–7 mm
SystemWeather-modified water-based intumescent
ApplicationSpray; brush for local repair
WeatheringDamp-heat, freeze-thaw and salt-spray rated
Recoat & curing≥ 12 h between coats; cure 7 days; topcoat recommended in corrosive areas
StandardGB 14907-2018
MOQTrial order — contact us
Packing25 kg plastic pail

Values shown are typical reference figures for this product type per applicable national/industry standards — not our own measured test figures. The test report of the exact batch/model prevails before contract.

Industrial & Engineering Coatings

Packaging and logistics

Standard export packs

5 L · 20 L · 20 kg · 25 kg

Primer, intermediate and topcoat quoted as one system with the mixing ratio on each label

Container loading

A 20GP is weight-limited for water-based paint: roughly 800–820 pails, about 21–22 t. The measured figure goes on your packing list.

Private label

Your logo and label layout on our formulation. Artwork proof and print run are confirmed with the quotation.

Put your brand on the pail →

FAQ

Questions buyers ask

Typically an epoxy zinc-rich primer with a polyurethane topcoat. The exact build-up depends on the corrosivity category and the service life you need.

GT-WTP

Send Your Enquiry

Thin-Film Weather-Resistant Intumescent Fireproof Coating for Exterior Steel

MOQ
Trial order — contact us
Packing
25 kg plastic pail

One form covers samples, quotations and catalogue requests.

By submitting you agree to be contacted about this enquiry.

Industrial & Engineering Coatings

Related

Related reading

Get an industrial coating solution

Send the service environment, the substrate and the protection you need. You get the primer–intermediate–topcoat build-up, film thickness and pricing as one package.

WhatsApp