youqing
Industrial & Engineering Coatings — packaging
Label artwork shown is our current design draft, pending final print approval.

GT-NTP

Thin-Film Intumescent Fireproof Coating for Interior Steel Structures

Request a Quote

MOQ: Trial order — contact us · Packing: 25 kg plastic pail

Interior thin-film intumescent fireproof coating to GB 14907-2018 at 3–7 mm build. It foams on heating to form an insulating carbon layer — the volume seller for industrial plants and warehouses, balancing fire performance, cost and application speed. For dry interior use; for load-bearing elements rated ≥ 2 h choose the thick-film non-intumescent grade.

  • Cost-efficient and friendly to bulk project procurement
  • stable intumescent performance covering 0.5–1.5 h ratings for mainstream plants
  • forgiving application with high spray efficiency on large steel beams
  • high bond strength — resists delamination

Industrial plants, warehouses and logistics parks — interior steel beams, steel frames and general plant steelwork

SpecificationFire resistance rating 0.5 / 1.0 / 1.5 h
Coverage4–8 kg/m² (at design dry film thickness)
Drying TimeTouch dry ≤ 12 h
VOCWater-based, low-VOC
Shelf life6 months (sealed, 0–38°C, dry and ventilated)
Lead time15–20 days production lead time, excluding freight
Recommended dry film thickness3–7 mm
SystemWater-based intumescent, single-pack
ApplicationSpray (brush for touch-up)
ColourLight grey
CuringMulti-pass spray to avoid sagging; cure 7 days
StandardGB 14907-2018
MOQTrial order — contact us
Packing25 kg plastic pail

Values shown are typical reference figures for this product type per applicable national/industry standards — not our own measured test figures. The test report of the exact batch/model prevails before contract.

Industrial & Engineering Coatings

Packaging and logistics

Standard export packs

5 L · 20 L · 20 kg · 25 kg

Primer, intermediate and topcoat quoted as one system with the mixing ratio on each label

Container loading

A 20GP is weight-limited for water-based paint: roughly 800–820 pails, about 21–22 t. The measured figure goes on your packing list.

Private label

Your logo and label layout on our formulation. Artwork proof and print run are confirmed with the quotation.

Put your brand on the pail →

FAQ

Questions buyers ask

Typically an epoxy zinc-rich primer with a polyurethane topcoat. The exact build-up depends on the corrosivity category and the service life you need.

GT-NTP

Send Your Enquiry

Thin-Film Intumescent Fireproof Coating for Interior Steel Structures

MOQ
Trial order — contact us
Packing
25 kg plastic pail

One form covers samples, quotations and catalogue requests.

By submitting you agree to be contacted about this enquiry.

Industrial & Engineering Coatings

Related

Related reading

Get an industrial coating solution

Send the service environment, the substrate and the protection you need. You get the primer–intermediate–topcoat build-up, film thickness and pricing as one package.

WhatsApp