youqing
Industrial & Engineering Coatings — packaging
Label artwork shown is our current design draft, pending final print approval.

GT-WSP

Ultra-Thin Weather-Resistant Intumescent Fireproof Coating for Exterior Steel

Request a Quote

MOQ: Trial order — contact us · Packing: 25 kg plastic pail

Weather-modified ultra-thin intumescent fireproof coating to GB 14907-2018, developed for exposed and semi-exterior steel. The formulation adds UV, humidity, freeze-thaw and salt-spray resistance; in fire it foams to form an insulating carbon layer while standing up to long-term outdoor ageing. For ventilated outdoor use only — not for permanent water immersion or highly corrosive chemical areas, and not a substitute for thick-film coatings on 3 h rated columns.

  • Resists heat-soak, humidity, freeze-thaw cycling and salt spray — no chalking or cracking outdoors
  • stable expansion ratio for reliable insulation in fire
  • strong adhesion on galvanised and carbon steel
  • compatible with weather-resistant topcoats for extended service life

Exterior walkways and covered links, canopies, pedestrian bridges, outdoor exhibition structures, exposed equipment racks and semi-exterior steel frames

SpecificationFire resistance rating 0.5 / 1.0 / 1.5 / 2.0 h
Coverage1.4–3.8 kg/m² (at design dry film thickness)
VOCWater-based, low-VOC
Shelf life6 months (sealed, 0–38°C, dry and ventilated)
Lead time15–20 days production lead time, excluding freight
Recommended dry film thickness1.0–2.8 mm
SystemWeather-modified water-based intumescent
ApplicationSpray, brush, roller
WeatheringDamp-heat 504 h · freeze-thaw 15 cycles · salt spray 30 cycles — pass
Recoat & curing≥ 12 h between coats; cure 7 days; weather topcoat recommended
StandardGB 14907-2018
MOQTrial order — contact us
Packing25 kg plastic pail

Values shown are typical reference figures for this product type per applicable national/industry standards — not our own measured test figures. The test report of the exact batch/model prevails before contract.

Industrial & Engineering Coatings

Packaging and logistics

Standard export packs

5 L · 20 L · 20 kg · 25 kg

Primer, intermediate and topcoat quoted as one system with the mixing ratio on each label

Container loading

A 20GP is weight-limited for water-based paint: roughly 800–820 pails, about 21–22 t. The measured figure goes on your packing list.

Private label

Your logo and label layout on our formulation. Artwork proof and print run are confirmed with the quotation.

Put your brand on the pail →

FAQ

Questions buyers ask

Typically an epoxy zinc-rich primer with a polyurethane topcoat. The exact build-up depends on the corrosivity category and the service life you need.

GT-WSP

Send Your Enquiry

Ultra-Thin Weather-Resistant Intumescent Fireproof Coating for Exterior Steel

MOQ
Trial order — contact us
Packing
25 kg plastic pail

One form covers samples, quotations and catalogue requests.

By submitting you agree to be contacted about this enquiry.

Industrial & Engineering Coatings

Related

Related reading

Get an industrial coating solution

Send the service environment, the substrate and the protection you need. You get the primer–intermediate–topcoat build-up, film thickness and pricing as one package.

WhatsApp