Gamme
Steel structures, floors and infrastructure — supplied as complete primer-to-topcoat systems.
Quantité Minimale: 1×20GP · OEM / ODM · Zones industrielles · structures acier · entrepôts · infrastructures
Revêtements industriels et d’ingénierie · 1×20GP minimum
Une des six familles de revêtements
Primer, intermediate and topcoat from one plant, with the build-up and film thickness written out for your exposure category.
Epoxy and polyurethane systems for coastal, chemical and heavy industrial exposure.
Epoxy floor coatings in thin-film or self-levelling, plus elastic track systems for sports grounds.
System datasheets, batch COA and the loading plan are issued with the quotation — the paperwork a project and a customs broker actually ask for.
Revêtements industriels et d’ingénierie
Les valeurs sont celles exigées ou typiques selon les normes citées, pour évaluation technique, et non nos propres mesures. Avant contrat, le COA du lot reçu prévaut.
| Spécification | ≥ 55% (topcoat) · ≥ 65% (zinc-rich primer) |
|---|---|
| Rendement | 6–8 m²/L per coat |
| Temps de Séchage | Touch dry ≤ 2 h · Hard dry ≤ 24 h (25℃) |
| Dilution | Two-component: mix ratio per TDS, thinner 5–10% if required |
| VOC | Batch-measured value stated on the COA supplied with each shipment |
| Scrub resistance | Not applicable — salt-spray and adhesion apply instead |
| Shelf life | ≥ 12 months (sealed, 5–35°C) |
| Standard | GB/T 30790.5 · GB/T 1771 · GB/T 9286 · HG/T 3668 (steel systems) ｜ GB/T 22374-2018 (floor) ｜ HG/T 3792 (fluorocarbon) |
| Emballage | 20 kg (two-component: base paint + curing agent) |
Figures in the table are the values required or typical under the standards named — not our own measured results. The COA of your batch prevails before contract.
01
Factory frames, bridges, storage tanks, outdoor metal facilities
02
Factories, parking garages, warehouses, shopping malls, schools
03
Curtain-wall metal panels, municipal works, sports tracks
Conditionnements export standard
5 L
Round pail
20 L
Round pail
20 kg
Two-component set
25 kg
Round pail
Autres formats sur demande：Primer, intermediate and topcoat quoted as one system with the mixing ratio on each label
Gammes de produits
Acier, sols et protection lourde
Constitution du système
Les valeurs sont celles exigées ou typiques selon les normes citées, pour évaluation technique, et non nos propres mesures. Avant contrat, le COA du lot reçu prévaut.
Comment choisir
| Model | Applications | Ligne projet |
|---|---|---|
| YQ-FC01 | Façades de grande hauteur, panneaux de murs-rideaux en aluminium, ponts et ouvrages d'infrastructure | Très bonne résistance aux UV et aux pluies acides |
| YQ-AR01 | Steel structures, railings, door and window frames, pipelines and mechanical equipment | Alkyd, epoxy iron-oxide, epoxy zinc-rich and water-based grades available |
| YQ-SS01 | Factory steel structures, bridges, storage tanks and outdoor metal facilities | Anti-rust and anti-corrosion with strong adhesion and salt-spray resistance |
| YQ-EF01 | Factories, parking garages, warehouses, shopping malls and schools | Wear-resistant and load-bearing, dust-proof and easy to clean |
| YQ-TR01 | School sports grounds, stadiums and community fitness running tracks | Good elasticity, anti-slip and wear-resistant |
Questions Fréquentes
À voir aussi
Send the service environment, the substrate and the protection you need. You get the primer–intermediate–topcoat build-up, film thickness and pricing as one package.